常用压接连接器孔径和镀涂要求一览表

文档格式：DOCX| 2 页|大小 35.68KB|积分 20|2022-11-23 发布|文档ID：170981172

下载文档

下载文档到电脑，查找使用更方便还剩页未读，继续阅读>>

侵权申诉举报

1 / 2

此文档下载收益归作者所有下载文档

版权提示

文本预览

常见问题

常用压接连接器孔径和镀涂要求一览表单位：Mm/mil工艺要求连接器connector成孑L (Finishedhole)钻孔(DrillingHole)镀涂厚度要求备注孔径 (HoleDia.)公差(Tol.)孔径 (HoleDia.)公差(Tol.)铜Cuthickness锡铅SnPbthickness欧式直公、直母压接孔1/40±0.07/ ±31.15/45.3± 0.025/±10.025~0.050.008〜0.01596、64pin铆接孔2.8/110+0.1/+42.8/110+0.1/+4NPNP欧式300pin压接孔1/40±0.07/ ±31.15/45.3± 0.025/±10.025~0.050.008〜0.015300pin铆接孔2.8/1102.8/110NPNP欧式弯母、弯公压接孔1/40±0.07/ ±31.15/45.3± 0.025/±10.025~0.050.008~0.01596\64pin铆接孔2.5/100+0.1/+42.5/100+0.1/+4NPNP2mmFB 连接器弯公、弯母压接孔0.725/28土0.075/+3-20.835/33± 0.025/±10.025min0.015max定位孔11.5+0.051.5+0.05NPNP定位孔22.05+0.052.05+0.05NPNP2mmFB 直公、直母压接孔0.725/28土0.075/+3-20.835/33± 0.025/±10.025min0.015max2mmFB 单pin电源螺钉安装孔0.025min0.015max1419定位孔1.5+ 0.11.5+ 0.1NPNP2mmFB 单pin电源-弯焊接孔0.725/280.835/330.025min0.015max定位孔 11.5+0.051.5+0.05NPNP定位孔22.05+0.052.05+0.05NPNP2mmHM-A、 C、 D、F压接孔0.6/24±0.05/ ±20.7/27.6± 0.025/±10.025~0.0500.004~0.010定位孔2/+0.05/2/+0.05/NPNP2mmHM-B压接孔0.6/24±0.05/ ±20.7/27.6± 0.025/±10.025~0.0500.004~0.0102mmHM-N-直定位孔2/+0.05/2/+0.05/NPNP安装孔6.1/+0.1/6.1/+0.1/NPNP2mmHM-N-弯定位孔2/+0.05/2/+0.05/NPNPTHT焊接1.3+ 0.12mmHM压接孔0.6/24±0.05/0.7/27.6±0.025/0.025~0.0.004~0.010。

点击阅读更多内容